Originally Posted by Army335xi
Dealer did a Full Programming as per SIB 16 01 11... Anybody know what SIB 16 01 11 states, or what the issue related to it is? Can't find anything on the NHTSA website for that one.
Theres a DEFECT CODE: 00 16 69 01 00 on the Invoice
Very Weird, the SIB 16 01 11 is for 2010 X5's, not 2011 X5's... But it stated that its to solve a CEL that occurs because of an error in the Car's Software...
Service Action: Program Control Units (DMTL)
E70 and E71 vehicles with N55 engines produced from 7/12/2010 to 11/20/2010
The following fault code memory entry may be stored in the Digital Engine Electronics (DME):
3227: DMTL leak diagnosis pump, activation: Line disconnection
The Service Engine Soon lamp (MIL) is activated if the error is present in 2 consecutive driving cycles; however, the emissions have not been adversely affected.
DME software error
This Service Action involves E70 and E71 vehicles with N55 engines produced from 7/12/2010 to 11/20/2010.
In order to determine whether a specific vehicle has had this Service Action completed or is affected by this Service Action, first check the B-pillar label for code number 590. If code number 590 has been punched out, the campaign has already been performed. If code number 590 has not been punched out, it will be necessary to utilize the "Service Menu" of DCSnet (Dealer Communication System) or the Key Reader. Based on the response of the system, either proceed with the corrective action or take no further action.
Program the vehicle using ISTA/P 2.40.3 or later.
Vehicle integration (new): E070-10-12-503 or later.