View Single Post
      09-12-2011, 11:57 PM   #324
luckyu's Avatar

Drives: 2007 328i, 1998 328i
Join Date: Jan 2007
Location: San Francisco Bay Area, California

iTrader: (1)

Originally Posted by piero_cro View Post
dont know why it can't be mounted to coilovers cause mine aren't goin low enough, this 10-15mm would be just great.. I don't have camber plates on my coils, and as I understood those are the perches that the coils without camber plates are mounted in right? or I got it all twisted? :S
Piero -- in case SP didn't answer your question -- you need to check which perch your coilovers are using in front. Most coilovers use a non-factory perch, usually about 2.25" or 2.5" inner diameter. But some like PSS use the factory upper perch.

You can tell by looking under your front wheel well and see how big the spring is. The inner diameter of the factory-style spring (or PSS spring) is much higher than a 2.25" or 2.5" ID spring. Compare yours to stock cars if you're unsure.
2007 328i ZSP. M3 suspension: custom valved Bilstein shocks, Hyperco race springs, M3 lower control arms front and rear, M3 sway bars, and M3 subframe bushings. E46 front guide supports. Euro tail lights.