View Single Post
      09-27-2011, 11:26 AM   #706
zazzn
New Member
1
Rep
21
Posts

 
Drives: None yet
Join Date: Sep 2011
Location: Canada

iTrader: (0)

Do you guys overheat the water primary or oil?

What CFM does the stock fan flow? All the stopping and going on a track requires a good fan to cool for the amount of time spend under 45MPH and during turn in as the air vacuum created when hard corning doesn't cool the rads efficiently.

I've used these fans before which flow alot more air then other fans...

http://www.zirgo.com/
The 16" flows 3000+ cfm.

What Oil cooler does the SETT kit use or the AR design?

I found an application chart for the setrab oil coolers. http://www.jagg.com/pdf/Application_...ons_112610.pdf Also I found the cooler which is listed at 450-475 HP listed for 259 on ebay.

Just curious if there are bigger coolers that will fit the stock location.

Last edited by zazzn; 09-27-2011 at 11:51 AM.