View Single Post
      10-19-2011, 12:57 PM   #55
4 pot warrior
MalM3's Avatar

Drives: E90 318I
Join Date: Apr 2009
Location: DENMARK

iTrader: (1)

Garage List
2006 e90  [5.00]
Originally Posted by research View Post
Coming back to older question, you said for 4 cyl it should be possible? So the whole thing is about finding a used column stalk from 320d and retrofitting it - they are cheap in germany, couple hundred euros give or take. is that really it? My car is 2006 build, and dealer going by VIN said it's possible to get this thing installed with a retrofit kit (he refused to give part number but said it's the module for steering column and a plastic cover).

So you reckon on 4 cyl it's a simple retrofit then?

Also, when people say dyanic cruise control do they mean just the regular CC that holds the speed? As opposed to ACC which is keeping same distance to car in front, requires a radar in grille, etc. Appreciate your feedback, you seem to know this well!
hello mate

Yeah this is old news now
I / weŽve fitted a good few recently (10+) in the past 2 months and theres been no issues

As i can see , on the 4 cyls, 540 regular cc is the only option
If you want the same function on the 6 cyl, this is also possible without any hardware upgrades

its only when you start looking into dynamic cc, that it gets difficult

But coding a used is poss
YouŽll need an autologic, as its the easiest imo

program the DSC
Program the SZL contact (cruise control arm part) to the car under retrofit / CIP
Reallign the steering angle sensor , and job done

Been there, done that, wanna do it again