View Single Post
      10-26-2011, 11:47 AM   #5
New Member
jomegared's Avatar
Drives: 2006 330i
Join Date: Sep 2011
Location: Nor Cal

Posts: 20
iTrader: (0)

Originally Posted by Brian_TII View Post
Not really... Just look up the spark plug replacement tread to get the plastic cover off. After that just look for broken bolts. You should be able to carefully and patiently remove the shaft of the broken bolt with a pick. If you have to you can use an extractor bit on your drill but you need to be careful to only get the shaft of the bolt. IMHO the pick wwas the easiest option... Just spun the old out.
Thanks Brian, I'll be sure to try the pick option first. (If that ends up being my problem.)
jomegared is offline   United_States
Reply With Quote