View Single Post
      11-04-2011, 09:00 PM   #5
F1330
0
New Member
 
F1330's Avatar
 
Drives: BMW 330XI
Join Date: Mar 2011
Location: Montreal

Posts: 25
iTrader: (0)

Hi , the wires I fixed were the orange, yellow and red that were hidden where you used the torque screwdriver to undo the side black plastic. In your case it is hard to see any evident usage. I would start with these wires since they are the ones that fixed the problem for my upshift. Also double-check your blue and purple wires. I am not sure if these would help but I had originally welded them.

Follow the wires through as much as you can I am certain you will find a cut in the plastic.

Good luck, let me know how it turns out.
F1330 is offline  
Appreciate 0
Reply With Quote