View Single Post
      12-26-2011, 03:12 PM   #11
tys90
Private First Class
3

 
Drives: 07 TiAg e92 335i
Join Date: Apr 2009
Location: Midwest US


Posts: 115
iTrader: (0)

All my wires were stripped/frayed to some degree so I cut all my wires, melted the insulation back with a solder iron then soldered all the wire ends. Then I used small butt connectors to reconnect all the wires and wrapped it all in electrical wire. I should mention that I unsecured the wire from it's twisted wrapping around all the plastic shields and stuff. It's just loose now and I tucked it behind the shifter before putting it back. Took me about 2-1/2 hours but the wire is so flimsy I wanted it to be as secure as I could get it.