View Single Post
      01-11-2012, 11:34 AM   #1
Tiago@VRSF
BimmerPost Supporting Vendor

 
Tiago@VRSF's Avatar
 
Drives: E92 335i, F30 328i, F82 M4
Join Date: Dec 2007
Location: Hudson, MA

Posts: 6,371
iTrader: (92)

Garage List
Send a message via AIM to Tiago@VRSF
|VRSF| ETS Intercoolers, Chargepipes & Exhausts - Unbeatable BLOWOUT Pricing!!!








VR Speed Factory is proud to introduce our full lineup of ETS Intercoolers, Charge Pipes & Exhausts for your E82/E90/E91/E92 BMW. PM us for the lowest pricing available now! We will not be undersold! If you get a quote for a lower price from anyone, contact us & we will earn your business!

BLOWOUT PRICING ON ALL ETS PRODUCTS!




ETS BMW 135i and 335i Intercooler Kit
Available in 5" or 7", ETS intercooler Kit Features
  • Full Intercooler Kit- Includes Intercooler, Lower Charge Pipe, Couplers, Clamps
  • Direct Bolt on with absolutely no cutting (5" Only)
  • Replaces Restrictive Stock Piping
  • Max HP Gains of 21.05hp
  • Over 60deg Lower Temps
  • No Heat Soak after a Pull
  • Reduces Knock
  • Durable Stainless Steel Piping
  • 4 Ply Silicone Couplers
  • Breeze Premium T-Bolt Clamps


ETS N54 135i and 335i Charge Pipe
The factory diverter valves and charge pipe is made out of plastic and is prone to leak under normal boosting conditions. This leak results in less power and less performance. The ETS Charge Pipe is a full 3.0 inch pipe made from 304 stainless steel and designed to handle higher then stock boost levels with no leaking.

Unlike our competitors we designed our 135i and 335i charge pipe to incorpate the factory 45 degree elbow. When matched with our intercooler kit the complete cold is replaced with 304 stainless steeling piping, 4-ply silicone and Breeze T-bolt clamps. By doing this it allows our charge pipe to work with LCI equiped vehicles.

Features:
  • TiAL, HKS, Synapse Blow Off Valve Flange
  • 304 Stainless Steel
  • 4-Ply Silicone Couplers
  • Available in Brushed, Flat Black or Gloss Black
  • Optional 1/8" Meth Bung Available
  • Fixes Leaky OEM diverter valves.


ETS N54 BMW 335i Exhaust System
The ETS Exhaust system is a direct bolt on for the 335i. This exhaust systems is constructed from 2.5" mandrel bent 304 stainless steel tubing with stainless steel v-band connections and OEM mounting locations and utilizes a unique crossover/x-pipe that helps to equalize exhaust pressure and tunes the exhaust pulse for optimal sound and performance. The ETS exhaust system comes with dual 4.0" stainless steel tips. These tips are 100% stainless steel and not chromed like many other exhaust systems... these tips will not rust!

Features:
  • 100% Bolt On Direct Fit - Mounts on factory exhaust hangers.
  • Dyno proven gains through out the RPM Range.
  • Dual 2.5" 304 stainless steel with dual mufflers for max flow.
  • Integrated x-pipe for optimal sound and performance.
  • Adjustable tip location.
  • Full stainless steel tips (will not rust!)
  • V-band connections for a perfect seal, no need for bomb proof gaskets.
  • Adjustable 2-bolt flanges to work with aftermarket downpipes that may be slightly off.
  • 4.0" Stainless Steel Exhaust Tips

PM OR EMAIL US FOR PRICING!

Last edited by Tiago@VRSF; 01-11-2012 at 12:05 PM.
Tiago@VRSF is offline   United_States
0
Reply With Quote