View Single Post
      02-09-2012, 01:04 PM   #1
themoveforward
Private First Class
 
themoveforward's Avatar
 
Drives: 13' 328xi MG mSport
Join Date: Dec 2011
Location: L.I., NY

Posts: 103
iTrader: (0)

INPA Transmission Adaptation Reset

Hi Guys,

I've been trying to reset the transmission adaption values through INPA, but when I load up the software, I click on E90, then select Automatic Gearbox GS19, but when it tries to read the module, it comes back with "Requested Control Unit Not Found, GS19/V.106......." Control Unit Found: GS1912.

I've tried to update to INPA 5.02/EDIABAS 6.47, but I'm still having the same issue. When I try to change GS19 in E90.ENG and E90.GER to GS1912, the software comes back with Error Compiling Script File.

I've found the GS1912.PRG file in TOOL32, and when I load it, some of the options are Initialisierung, and another steuerngeraete_ reset. I believe steuerngeraete_ reset is the correct option to run, but if anybody knows for certain that would be great.

Any help would be appreciated.

This is on an 07' 328xi Automagic.

Last edited by themoveforward; 02-09-2012 at 02:41 PM.
themoveforward is offline   United_States
0
Reply With Quote