View Single Post
      02-21-2012, 11:36 AM   #46

Drives: 2006 325i Sport
Join Date: Jun 2006
Location: Virginia

iTrader: (0)

I just removed the two banjo bolts on the steering rack, and let the hoses drain. Then I opened up the line that runs over to the right side of the rack by removing the flair nut and pulling the line out. I then just flushed the rest of the oil out using low pressure shop air in the oriface the line was in. I reassembled the line, flipped the crush washers over, retightened the banjo bolts, and refilled and bled the system. Not rocket science. Not sure how you get a torque wrench on the banjo bolt heads to torque them down. Just don't be an ape with it and stop tightening when the bolt stops.