Originally Posted by JimVR4
I was able to unpack and install your BMW_Coding_Apps_v2.rar on my Win7 Ultimate 32 bit OS. I bought a cable from Ebay seller Alborz1010 that claims to support K and D-CAN so it should work for my 2009 E90. I'll report back when I receive it in about 10 days.
I received the cable and had a chance to give it an initial tryout. I previously loaded all the drivers and when I plugged in to cable it load drivers for D-CAN and then K. My car is a 2009 328i so it uses D-CAN.
Moving to the garage I plugged in the cable, ran INPA, and was able to get both black circles. I used shift F3 to get to the E90 section and attempted to check the airbag but there was a compatibility error. Then I loaded CAS and it worked as I was able to get information from the car.
So, I know the cable is working properly. Some of the modules I tried to load gave me warnings or reports of incompatibility. So it seems like the SW I have isn't new enough for my car.