View Single Post
      04-01-2012, 07:45 PM   #4
Dziqsek_
Banned
Poland
4
Rep
413
Posts

 
Drives: e91 320d
Join Date: Feb 2012
Location: Jelenia Gora ( Lower Silesia )

iTrader: (0)

This is all functions you need to change to get rid of bulb errors :


Warm test Brake
WARMUEBERWACHUNG_BL_MI -> nicht_aktiv

Cold Test Brake
KALTUEBERWACHUNG_BL_MI -> nicht_aktiv

Warm test turn
WARMUEBERWACHUNG_BLK_HI -> nicht_aktiv

Cold test turn
KALTUEBERWACHUNG_BLK_HI -> nicht_aktiv

cold rear turn signal...
KALTUEBERWACHUNG_BLK_H -> nicht_aktiv

cold brake light.....
KALTUEBERWACHUNG_BL -> nicht_aktiv

warm rear turn signal...
WARMUEBERWACHUNG_BLK_H -> nicht_aktiv

warm brake light..
WARMUEBERWACHUNG_BL -> nicht_aktiv

Brake force display
CC_MELD_BFD_BL -> nicht_aktiv
FEHLERMELDUNG_CC_BFD_L -> nicht_aktiv
FEHLERMELDUNG_CC_BFD_R -> nicht_aktiv


[[Cold Test Brake Light]]
KALTUEBERWACHUNG_BL -> nicht_aktiv

[[Warm Test Blinker Rear]]
WARMUEBERWACHUNG_BLK_H -> nicht_aktiv

[[Warm Test Brake Light]]
WARMUEBERWACHUNG_BL -> nicht_aktiv

[[Cold Test Brake Force Display]]
KALTUEBERWACHUNG_BFD <--Cold BFD test

[[Warm Test Brake Force Display]]
WARMUEBERWACHUNG_BFD <--Warm BFD test

WARMUEBERWACHUNG_BLK_H


You may not have all features , they are from my nfrm but most of them should present in your module.

Greets from Poland