View Single Post
      05-17-2012, 08:51 PM   #13
DESI4life10
Banned
Canada
70

 
DESI4life10's Avatar
 
Drives: Coding: Desi4life10@gmail.com
Join Date: Oct 2008
Location: West of Toronto, Canada


Posts: 3,365
iTrader: (18)

Quote:
Originally Posted by Virterm View Post
I will be retrofitting non-adaptive lights, so I will not have any halogen bulbs there, just bi-xenon. I understand that wiring changes for bi-xenon is required, but do I still need to make changes to PWM_ANST_FL_BIXENON ???
Also, if I make sure that high beam is not set to DRL mode, will I have a problem with xenon stutter not working properly at 6V? Or should I be ok, since high beam will operate at normal voltage (12V)?
Yes you still need to make the changes to the line as you will use lose your highbeam.

And by not shutting the drl off, you will hear a humming noise from the shutter and it will turn off once you flash the high beam. It will happen at every startup until you flash it or if you turn the DRL off.