Originally Posted by kaigoss69
SVO, try to leave the sub out of the equation for now. I suspect the Focals are too inefficient to be run by the MS-8. So try to run the underseats to about 40hz, set the highpass for the components and coax to 200hz (all 24 db/oct) and see if you can get a decent calibration.
90dB efficiency at 4 ohm on the fronts. (subjectively very close to stock) That almost certainly is not it, but I'll give it a shot. Eliminating everything between 40 and 200Hz? How would I bring that back after calibration while retaining the calibration?