View Single Post
      06-14-2012, 07:29 AM   #24
Second Lieutenant

Drives: 318i
Join Date: Mar 2012
Location: Singapore

iTrader: (0)

Use revtor's profile or any profile with MAN file manipulation enabled. Read out your frm module. Search for SPIEGEL_BORDSTEIN_AUTOM in your fsw_psw.trc file and set to aktiv. Save it as The code the frm module by running sg_codigen job.

The controller hardware can be accessed by removing the painted mirror cover. If the mirror does not have the folding option, you can remove the controller after removing the entire mirror assembly and the connectors on the glass. Else you have to cut the wires since the folding mirror motor is wired to the controller and can't be removed without "destroying" the mirror

Last edited by snoozee; 06-14-2012 at 07:44 AM.