View Single Post
      06-19-2012, 03:06 PM   #9

Drives: 2008 335i
Join Date: Jan 2012
Location: Atlanta, GA

iTrader: (2)

Originally Posted by bmwretrofit View Post
You use a bad quality CAN Filter Activation module.
Flickering of the screen on the CIC is well known problem for some cheap CAN filters.
Contact with manufacturer and ask for the replacement.
It is not right when the manufacturer is asking you to solder the electronic components on board of their product to get the problem fixed.
Well I bought my CIC from ebay from a guy who was putting his car back to stock to sell (CCC) and it came with this emulator. Also judging from their website I doubt they will stand behind their product and I don't have a purchase receipt for it (outside of ebay.)

As for whether or not the capacitors work... it has flickered once since then which is a big improvement, but I am going to just keep an eye on it for the time being. If need be I guess I could solder on 2 more capacitors in parallel, but we will see.
2008 335I E92, AW, VFF700, 18" Forgestar F14, M3 front/side, M-tech rear, AMS IC, H&R Touring Cup Kit suspension, HID AE, ER Charge Pipe & Synapse BOV, CIC Retrofit, Quafie, DSS, Defiv Lockdown, SPEC 2+/Steel SMFW, Walbro 450