View Single Post
      07-22-2012, 08:57 AM   #31
Private First Class
TenshiWingusu's Avatar

Drives: '07 335xi
Join Date: Jul 2012
Location: United States

iTrader: (0)

A trick i found for the rubber electronics holder. Once you get the charge pipe off and clear, undo the manifold bolts and pull the manifold out and rotate it as much as you can without pulling wires. Its tight and needs some work but once you have clear work room on the back of the manifold where the rubber holder is stick a bar or similar (we used a large paid of needle nose pliers) between the holder and the bracket and pry down. The holder slips right off it was super easy.