View Single Post
      08-01-2012, 11:57 AM   #5
DaanBMW's Avatar

Drives: 2007 328i coupe
Join Date: Jun 2011
Location: Portland, OR

iTrader: (1)

^ what he said.

The front wishbones are a very tight fit where they mount to the subframe. I found out that most installers grind a little off of the bushing (you can’t file it, it’s hardened steel; take off a few thousandths and they’ll slip in) so I had the mechanic do it after checking it was indeed needed. (Some have taken a file to the subframe instead, but it's the hard way).
328i Sports Pkg, Michelin PSS on Staggered 18" OZ Ultraleggeras
. BMS Powerbox. Cyba scoops + Rev motoring intake hose + charcoal delete. Wavetrac LSD
. M3: subframe bushings + sways + control arms (fr & rr). Meyle rear toe arms. M3 diff fr bushings
. BMW Perf: v2 springs + v1 dampers. Valeo SMFW+clutch. 034 MotorSport engine mounts
. Short Shifter + Turner PU bearing + ECS Teflon bushings + ZHP M weighted shift knob. CDV delete