View Single Post
      08-10-2012, 03:18 PM   #6

neilvosko's Avatar
Drives: 335i e92 FBO
Join Date: Dec 2011
Location: miami

Posts: 1,429
iTrader: (16)

you can also get some sim resistors on ebay.

Originally Posted by N54_Fan View Post
13)Now that the paint is dry on the wire spool cut 3 - 4 inch pieces and fish through the pilot holes you drilled in the base of the tabs and the mesh grill. Use a large pair of pliers to twist tie this wire. It is best to PULL HARD while you twist. This will ensure a snug tight attachment. Use the pliers to bend the edges of the mesh and wire twisties away from you so that you minimize cutting yourself in the future.
14)Reinstall the bumper and enjoy!!