View Single Post
      08-20-2012, 11:02 PM   #3
Detailed Image
BimmerPost Supporting Vendor
Detailed Image's Avatar

Drives: Detailed by Detailed Image
Join Date: Apr 2007
Location: Albany, NY

iTrader: (5)

If you are referring to it being on the plastic screen protecting the gauges as seen here (, here is what I'd suggest. A little bit of heat from a blow dryer can help loosen the adhesives, however be careful you don't melt or burn any part of the interior. You can then use a plastic razor blade or some floss and carefully try to remove it from the surface. A thin flimsy plastic credit card can also work. Go slow and don't use too much power, try finesse the best you can. If you have minimal residue left over the Meguiar's PlastX Clear Plastic Cleaner and Polish should finish cleaning up the rest of it. If you have a lot left over you could try to use a clay bar on it instead of a product like goof off or the 3M Adhesive Remover. Let me know if you have any other questions and I'll be happy to help.

Greg @ DI