View Single Post
      08-22-2012, 02:15 PM   #8
Private First Class

Jose_JN's Avatar
Drives: e93 330d
Join Date: May 2011

Posts: 177
iTrader: (0)

White with a red stripe -> Positive
Brown -> Negative

TEST IT WITH A VOLTMETER BEFORE CUTTING THEM. You can connect the voltmeter to the windows panel connector and turn the ignition on (don't worry, it is not dangerous even if the windows panel is not connected but be very careful of not short circuiting them!)

The value should be around 9v (remember that the brightness can be seted with the BC menu)

Why don't do it by your self?
Retrofitting is always possible!

Last edited by Jose_JN; 08-22-2012 at 02:21 PM.