Originally Posted by roadkillrob
There is a DIY somewhere that I used, I will try to find it, but basically you need to remove the 2 little covers off the paddles that cover up the electronic board and then you need to press you the shaft that the paddle pivots on (be careful when you get it all the way out and can remove the paddle as there is a small spring and ball under it that can pop out. Once you have the paddle out, you wil then be able to unscrew it from the rest of the assembly and attach the new one and reassemble.
I will see if I can find the DIY I found that showed it
I have the same wheel and want to get these paddles. Let me know when you find that DIY! Did you have to remove the whole steering wheel from the column?