Thread: Just put jb4
View Single Post
      09-16-2012, 08:12 PM   #13
ksalih's Avatar

Drives: '08 335i
Join Date: Mar 2012
Location: Gilbert, AZ

iTrader: (1)

Originally Posted by D27 View Post
It true that once I put jb4 I should change the coil and the spark plug? I have 40mile and I had jb4 for a week already and it was misfire 5,6 so I change just the coil and it run fine both coil 5,6 should I change the rest 1,2,3, and 4 and all spark plug or just wait until they go bad?
I THINK you are asking if you should replace all plugs at 40k miles. I know you said 40mile, but again i THINK you meant 40k Yes OP, replace plugs. I did right after Jb4 isntall because of missfires. Haven't had a missfire since.
'08 E92 335i Pre-LCI | Sparkling Graphite Metallic | VRSF Downpipes | Wedge/BQ e30 tune | DCI's | Alpina B3 TCU Flash | NGK 5992 Plugs | Fortune Auto 500 w/ 8k/11k Swift Springs | 28mm ECS solid FSB | M3 Front and Rear Control Arms w/ Rogue Adjustable Toe Arms | 18x9.5 et22/18x9.5 et35 Arc-8's wrapped in 275/245 NT05's | Straight pipes, secondary's replaced with AR20's | Poly transmission mounts | Solid aluminum subframe bushings | A front bumper that looks like I waxed it with 5 grit sandpaper..