Originally Posted by cn555ic
Thats perfect...I would still set the injection value to 33 at least as 30 is way too low...Shiv recommended only a few values but your value is almost 8 off..
Thanks. Set to 35 and I think I'm good. Thanks for the tip on the aquamist flow sensor. So easy to hook up, 1 wire to procede flow input, 1 wire to ground, 1 wire to power, and done! Hope he gets more in stock soon for others to put to use.
One interesting note, I put in a DO 12 and it flowed steadily at 43. Maybe I had a narrow DO14 and a wide D012, not sure.