HPF 335i Single Turbo Project revisited with a Bet!
View Single Post
10-04-2012, 05:23 PM
Join Date: Jun 2011
Location: Portland, OR
Right off the bat you will notice the twin wastegate mounts. We decided to go with this design for flawless and ease of boost control. You’ll then notice the smoother twin scroll division. This served two purposes; faster spool up and allows a plethora of turbo chargers to be used with our kit. As mentioned before, we’ll be using a dual ball bearing 6466 divided turbo with our initial kit. We will definitely be testing other turbos as we develop more stages for the kit.
The runners are also nearly equal, that is always beneficial. With the manifold now in our hands, we are just in need of closing up lose ended projects before we can fully dive right into finishing the 335i kit. As always, we’ll be updating you as progress happens. Also we do plan on selling some components separately for those that would like to choose their own turbo and tune on their own.
View Public Profile
Find More Posts by HPF Kirk