View Single Post
      10-09-2012, 07:52 PM   #23
F1330
New Member
F1330's Avatar
0
Rep
25
Posts

Drives: BMW 330XI
Join Date: Mar 2011
Location: Montreal

iTrader: (0)

Unfortunately, I don't recall which wires I fixed but there were many. Just follow each wire and look for cuts. I recall at one point the wires seem to lead to the side of the shifter and back out. It is at this point I dismanteled the clip (believe it was 2 screws) and realized the wires were cut. If I didn't dismantle I wouldn't have seen it. You should first look for the obvious wear and tear and repair. If that's not the problem I would then dismantle the portion. Unfortunately I don't have pics. Good luck