View Single Post
      10-11-2012, 05:46 PM   #1
sid21177
Private First Class
1
Rep
120
Posts

 
Drives: 2011 328i AW/ 2013 128i AW
Join Date: Jun 2012
Location: Phoenix, AZ

iTrader: (0)

Garage List
2013 128i AW  [0.00]
2011 328i AW  [0.00]
Nettodat Coding not working - what could be wrong ??

So I have a 2011 E90 with halogen lamps and AEs
I wanted to increase the AE brightness, and I read/was told that I would have to code via nettodat to achieve that.

I got the nettodat.trc for my NFRM module using the FSW PSW profile.
The hex values for PWM_SL_1_FKT_BL_TFL & PWM_SL_1_FKT_SL_TFL were showing as 10,00
I used NCS Dummy to update them to 0C,2C and create the nettodat.man file (A compare shows the change correctly)

I used the normal procedure for coding, except selecting coapiCodeSgByNettoData as the basic function (supplying nettodat.man as the value for the Nettodatenliste parameter)
The jobname was kept as SG_CODIEREN while executing the job, which completed successfully.

However, when I read back the NFRM module to confirm the changes, the nettodat.trc file shows the old values 10,00 for both keys.

What could I be doing wrong ??
I've used both the FSW PSW & revtor expertmode profiles and the result is the same.

Is it not sticking coz I have halogen headlamps ??
Please help