Originally Posted by BADS335
I was running stage 2 with a little more bias toward higher boost and timing. In the problem area it was originally targeting 15.35psi at 5k tapering from there and about 6* rising to 10* advance from 5k-6k. Start boost in is set to 50% and IC is set to 70%. It reacts very well in the low-Mid range with these settings and never has an issue until the 5k mark. I am guessing since these settings are global, that it offsets maybe too much in the higher range and may be too aggressive with the additional biasing. I am hoping to find a happy medium in the boost and leave timing alone. Unless someone with more experience chimes in and says back off that timing up top cause its insanely too high haha.
so your requesting 6deg ->10deg from 5k to 6k???
SOLD --'07 E90 335i, PTF COBB E50, HFS4, ER CP, ETS 7", AA DP, Vishnu Exhaust, DCI, ACT, Nitto Nt555
SOLD '10 E92 335i M, 6MT COBB v3, ER IC, ER CP, VRSF DP, Fuel-it st2, Mfactory LSD