View Single Post
      10-23-2012, 04:28 PM   #127
enrita
Major General
enrita's Avatar
Sweden
94
Rep
7,331
Posts

 
Drives: 335i - Big turbos
Join Date: Sep 2008
Location: Italian in Sweden

iTrader: (0)

Quote:
Originally Posted by cn555ic View Post
Thats not entirely true...I have mine working perfectly with my Procede 2.5 but I am using the PPS kit that I put together myself...I would help but I have no idea what to tell you to troubleshoot. I have the older Aquamist unit though in which I had to set it up with resistors for the yellow wire to Procede, and I know the newer unit has a voltage dial in which you can dial in the voltage you want outputed.. Mine is working flawlessly and I think Scott got his newer Aquamist flow sensor working perfect too, so it has nothing to do with the Procede and the integration of this flow sensoor I would say its wiring of some sort Chefcq1...
exactly you used a resistor to mimic the voltage that procede wants. no settings on the sensor worked with procede. believe me i tried. yes you can make it work but its a pain and definetely not pnp like jb4 fsb.
you can probably rescale the procede input as well but in my case no go for it.... i understand avoid custom stuff per customer but there should definetely be some kind of easy setting in the procede to accomodate all kind of sensors but i guess that would go against vishnu policy ....
__________________
07 335i AT - TD St.2 Turbos - COBB (Custom Cobb mapping by http://www.protuningfreaks.com/) - JB4G5 ISO - Okada Coils - NGK 5992 Plugs - E85 Walbro - Injen Intake - Helix IC - Snow Stg. 3 - Stett CP - AR DPs - midpipes 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - Level 10 AT upgrade - Alpina AT Flash