View Single Post
      11-04-2012, 03:14 AM   #2
MonacoBlueE90
Colonel
MonacoBlueE90's Avatar
Finland
30
Rep
2,404
Posts

 
Drives: BMW E90 Pre-LCI
Join Date: Jan 2012
Location: Europe

iTrader: (0)

Quote:
Originally Posted by Aija View Post
I have e92 and e39 that I drive often. Out of curiousity, will my aftermarket rims on the e92 fit on the e39?

Rims: have ICONZ 880ZR, 19x8 & 19x10, Front- 235/35/19 Rear 265/30/19) on my E92 335i.

Will these rims fit on a 2001 E39 5 series? I would like to have the rims on the E39.

Doing a little research I found that

E39 = PCD 5x120, centre bore 74.0mm and M12x1.5 bolt thread. ET 15-25
E90's = center bore 72.56 mm

Does the adapter only work going to a lower number?
If your Iconz wheels center bore is 72.6? You can't use those directly on E39 because it won't fit over the 74.1 centerbore. Hubcentric rings works only towards smaller diameter.

However

You could find spacers that are 74.1-> 72.6 centerbore.
What size spacers depends on your Iconz wheels offsets?
__________________

Last edited by MonacoBlueE90; 11-04-2012 at 04:24 AM.