How can I tell whether timing is good or bad? It's the ignition correction channel?
I used map 1 with stock values except start boost and overboost limit as I believe 15 PSI is way too low for a FBO car with upgraded turbos... Keeping in mind that with older autotune (V5 7-29) maps and Rev2 it autotuned to almost the same boost levels (17.5-18.3 PSI). And these new ones are aggressive maps.
: RB turbos, PROcede Rev2.5 V5, BMS DCI, Scoops, Forge DVs, ar design catless DPs, Milltek exhaust system, Helix FMIC, Quaife LSD, VK MotorWerks OC Kit, Bilstein B16 PSS10
The ultimate mods' installation thread
Last edited by edo; 11-11-2012 at 08:01 AM.