View Single Post
      11-12-2012, 08:14 AM   #2
Drives: E91 335d.
Join Date: Sep 2010
Location: Shropshire, UK

Posts: 945
iTrader: (1)

Don't know about the 3 series, but the 5 series rivets have a removeable centre peg - remove it and the rivet can be pulled out.
The downside is that the centre peg can only really be pushed out - into the void between the wing and the liner, where you can't really get it out.
They are cheap enough to replace if you need to re-use the flaps.
The holes are drilled into plastic, so there should be no rust issues, but I would still seal the holes with a little silicon to stop muck getting in, building up and blocking the drains (the heater plenum drains into the wing void)

AlwynMike is offline   United Kingdom
Reply With Quote