View Single Post
      11-15-2012, 11:01 AM   #2
enrita
Major General
enrita's Avatar
Sweden
94
Rep
7,331
Posts

 
Drives: 335i - Big turbos
Join Date: Sep 2008
Location: Italian in Sweden

iTrader: (0)

Quote:
Originally Posted by cstavaru View Post
Hi,

After I installed the RB turbos, I tried to use an OTS map and adjust the WGDC Base table for the new turbos. I nailed it perfectly for WOT, but at partial throttle I still need to lower some values from the table (in the area of 400kg/h and factor 1.5), which are already very low. Like, I need to lower by 3, a value which is now 1.5. However this table does not accept negative values (any negative value that I input is rounded to 0).

What can I do about this ? Any other tables that I can work on to further lower the final WGDC values ? I don't really want to live with this part throttle overboost.

Edit: I now see that the "WGDC Adder (Airflow)" table has a positive value in the 500 area, so I will just zero that value out. But I don't think it is enough. What does the "WGDC (Pre-control A)" table do ?

I also have a map in the works with PTF, but I don't like the fact that I can't see anything inside it with ATR, and also it's a tedious back and forth process. So I would very much prefer to have my own ATR maps that I can modify as needed.

Any help on this would be appreciated !
what kind of DME do you have?
__________________
07 335i AT - TD St.2 Turbos - COBB (Custom Cobb mapping by http://www.protuningfreaks.com/) - JB4G5 ISO - Okada Coils - NGK 5992 Plugs - E85 Walbro - Injen Intake - Helix IC - Snow Stg. 3 - Stett CP - AR DPs - midpipes 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - Level 10 AT upgrade - Alpina AT Flash