Originally Posted by djbordie
it certainly has a large 4 pin connector...but i will double check the wires.
im going to do the OEM speaker/xd600 route until the dls and sw8 arrive in the mail. ultra low on the gains i suppose.
i think its all sorted...except for the amp settings.
rca's ch 1-4 as labeled
input switch set to 4 ch
summon 5/6 from 13/24 (gonna have to research that...)
Once you set the input switch to 4CH then the XD600/6 will create the 5/6CH outputs by summing all the 4CH inputs automatically. No need to do anything else other than adjusting the crossovers for each pair of outputs.
To easily install the SWS-8 you will need spacers.