View Single Post
      11-19-2012, 05:03 PM   #86
David@ApexRaceParts
BimmerPost Supporting Dealership

 
David@ApexRaceParts's Avatar
 
Drives: M3
Join Date: Jun 2012
Location: Bay Area

Posts: 1,363
iTrader: (0)

Quote:
Originally Posted by DallasBoosted View Post
Would the 17x10.5 et27 Arc-8 fit the rear of a E92 pre-lci 335? I am running lots of camber (2.2 degrees negative in the rear) and 275/35-18 Michelin PSS on the rear with 18x9.5 et35 arc-8's right now, and the tires are nowhere near the fenders.

I'd want to run 275/40-17 NT01's on the 17x10.5's.

Thanks
If you are willing to heavily roll the rear fenders and don't mind some slight tire rubbing even after the fender roll and negative camber in the rear, it can be done. With the 275/35/18 Michelin PSS on the 10.5" width wheel, it is slightly stretched so that it may get away without any rubbing with the negative camber in the rear, but if you have a full car or under full compression, theres a chance of rubbing.

As for the NT01s in 275/40/17, those run very wide and will most definitely cause rubbing onto your fenders even with the heavy roll. The 265/40/17 would be the better fit on your car for the R-compound, and even then that's pushing it after the fender roll.
David@ApexRaceParts is offline  
0
Reply With Quote