Thread: DME failure :(
View Single Post
      11-20-2012, 12:34 PM   #28
Second Lieutenant
tmo335tt's Avatar

Drives: E90 2008 335i
Join Date: Apr 2011
Location: here

iTrader: (0)

The injector MOSFETs on this board are not very difficult to solder..I did it and replaced two on my board with no problems and it took me no longer than 30 took me longer to determine which ones were bad. If you have ever soldered on an RC car or the like then you can handle it. Plus if your thinking about buying a new DME then you have nothing to lose by trying this first. I was lucky and fixed mine for free by bumming parts out of another members failed DME.