View Single Post
      11-27-2012, 09:21 AM   #3
Some dude

Drives: E28 M5, E92 335i
Join Date: Sep 2011
Location: Northern VA

iTrader: (0)

Originally Posted by idnan View Post
Looks like you put the slave cylinder in at an angle and it didn't engage with the clutch when you pressed the pedal. The push rod in the slave cylinder pops out and fluid pisses out
Exactly. You missed the release lever with the pushrod on the slave cylinder. It happens. You may be able to push it back together and put the rubber dust seal back on. You'll just have to bleed the clutch. You may be able to get away with topping off the brake fluid reservoir (must be pretty full, at or above the MAX mark) and pumping up the pedal with your hand. You will have to pull the pedal up, wait a second, push down, wait a second, pull up, repeat about 100 times. You will feel the pedal getting firmer if this method is successful.
RRT Racing
E92 335i/6MT Dinan Stage 3: intercooler, oil cooler, intake, flash, exhaust, LW dual-mass flywheel.
Vishnu PWM methanol custom trunk mount, Diffsonline 3-clutch Salisbury custom diff, Ohlins Road and Track coilovers, Vorshlag camber plates, much more...
E28 M5 w/ buncha stuff, R171 SLK350