View Single Post
      11-27-2012, 12:58 PM   #36
Reznick
First Lieutenant
 
Reznick's Avatar
 
Drives: 2008 M3 ,2000 330
Join Date: Jul 2007
Location: Syracuse NY

Posts: 384
iTrader: (0)

Quote:
Originally Posted by zzzbullseye View Post
Looks like the link above is broken...
Sorry fixed the link http://www.tirerack.com/wheels/tech/...sp?techid=107&

This was the first part of the write up on TireRack & it basically says what I said about the application of never seize in my reply above .

Proper installation requires that the wheel lug torque be set to the recommended specification for your vehicle. These torque specifications can be found in your vehicle's owner's manual, shop repair manual or obtained from your vehicle dealer.

Wheel lug torque specifications are for clean threads that are free of dirt, grit, etc. If applying an anti-seize lubricant, it is important to note it can be applied only on the threads of nuts or bolts. The lubricant must not be used on either seat of the hardware of the wheel. With the seat being the main point of friction where torque is measured, extreme caution must be used if an anti-seize lubricant is applied to the threads as excess can either drip or be pushed onto the lug seat resulting in inaccurate torque values.

A thread chaser or tap should be used to remove any burrs or obstructions of the threads allowing the lug hardware to be turned by hand until it meets the wheel's lug seat. Once lugs are snugged down, finish tightening them with an accurate torque wrench. Use the appropriate crisscross sequence (shown below) for the number of wheel lugs on your vehicle until all have reached their proper torque value. Be careful because if you over-torque a wheel, you can strip a lug nut or hub, stretch or break a stud or bolt, and ca
Proper installation requires that the wheel lug torque be set to the recommended specification for your vehicle. These torque specifications can be found in your vehicle's owner's manual, shop repair manual or obtained from your vehicle deal

Last edited by Reznick; 11-27-2012 at 01:05 PM.
Reznick is offline   United_States
0
Reply With Quote