View Single Post
      11-29-2012, 05:40 PM   #12
ksalih's Avatar

Drives: '08 335i
Join Date: Mar 2012
Location: Gilbert, AZ

iTrader: (1)

Originally Posted by adnanm3 View Post
So i've narrowed it down to two options, but none of them are even close to 7 inches in length. I understand the inlet portion could be trimmed, but It seems to me like there isn't enough length on the inlet portion of the tips to cut 3 inches or so.

1. These are 10.25 in length

2. These are 11.5 inches. I like that the outlets are slightly slanted to flow with the bumpers (similar to cyba's)
Is your bumper aftermarket? Otherwise how will you fit quads? 'Tis The reason I have not done this. Try btw
'08 E92 335i Pre-LCI | SGM | PTE 6062 VM ST top mount conversion | Alpina B3 TCU Flash | Fortune Auto 500 w/ 8k/11k Swift Springs | 28mm ECS solid FSB | M3 Front and Rear Control Arms w/ Rogue Adjustable Toe Arms | 18x9.5 et22/18x9.5 et35 Arc-8's wrapped in 275/245 NT05's | VRSF V2 catback exhaust | Poly transmission mounts | Solid aluminum subframe bushings | A front bumper that looks like I waxed it with 5 grit sandpaper..