View Single Post
      12-08-2012, 08:11 PM   #4286
najin23
Private
0
Rep
85
Posts

 
Drives: e92 n54 LSD....
Join Date: Nov 2011
Location: southeast

iTrader: (0)

Garage List
2007 335i e92  [0.00]
Quote:
Originally Posted by Dcara View Post
So I have messed around with my setup to a point where I no longer know up from down so I have decided to start from Scratch and was hoping for some direction before I start.

I am using a macbook with VMware fusion. I have installed Windows 7 untimate (x86)

This is where I could use some help.
I have found more than one DIY and don't know which one I should follow.
One is on this forum Called "BMW coding success" The DIY has the follwing Files and guide.

Program files
http://rapidshare.com/files/429882289/NCSEXPER.rar

DIY in PDF format
http://rapidshare.com/files/429875523/NCS_DIY.pdf


I had also found a BMW all in one download. (don't recall what forum it was in)

Here are the issues I have been having...
1 - The one quoted above
2 - The driver for the cable (I bought the one in the BMW CODING Success DYI) does not seem to work properly. when I connect the cable it shows up under USB and has no driver. Manually updating the driver does not work.
3 - when I open INPALOADER with no cable connected to my computer I get the black dots for Battery and Ignition (is that normal?)

All that being said if anyone can point me in the right direction of a good DIY and the proper files to use I would really appreciate it!!!!!
I have succeeded with the first one. I did enable digital velocity, remote close/open everyting, side signal delete. I am about to do more mods as long as my old 06 built e92 335i allows.