Originally Posted by Vargasturbotech
Extremely doubtful it will fit an XI or RHD. Its a squeeze to fit as is. Also you should not have to remove engine to install. We suggest subframe removal for ANY turbocharger swap, stock, upgraded, anything. The job can not really be done properly leaving it in place let alone someone trying to do it their driveway. For this kit it will need to be installed by a qualified technician. This is not a project you want to do in your garage or driveway. With that said we are taking every effort to make sure it installs as easy as possible.
I did my RB install in my driveway with subframe dropped about 1" wasn't to bad....but wasnt the easiest lo!!
JB4 G5, WEDGE flash, Walbro 455 LPFP, HFS-4 meth kit 4-AN SS lines, BMS OCC, RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms W/upgraded bushings, M3 Strut Brace, M3 front sway, Meyle HD tie-rods, HPA rear toe arms, Wavetrac LSD, DEFIV kit, Ohlins R/T Cois W/12KG swift springs, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, Morr VS8.2 rims 245/295