Thread: Fault Codes
View Single Post
      12-31-2012, 10:37 AM   #9
Second Lieutenant
Cure12's Avatar

Drives: 2011 335
Join Date: Apr 2012
Location: New York

iTrader: (3)

Originally Posted by Abear View Post
What kind of coding do you have done, besides the digital speedo.

Also, you said something about the intake, did you make sure and tighten the clamps good. If you have an air leak after the air meter, it could cause some idle issues.
I have:
-Key fob opens/closes windows/mirrors/sunroof/trunk lid
-Remove seatbelt chime/warning
-enable windows to close when door is open
-Euro double blinking hazards
-Komfort Eject- Key fob auto ejects from socket (E series only)
-fog stay on while flashing high beams
-fogs stay on with high beams on

i have not however coded out the monitoring for the fogs...I also have led reverse lights with canbus so there is no error on the dash but they also have not been far as the intake im positive it was on tight cuz i actually put the OEM one back on to compare and the weird idle was gone...kinda weird...
///Mods: ER CP, Helix FMIC, Dinan FFE, BMS N55 Intake, VRSF Catless DP, proTUNED...///