Another M3 wishbone install question
Happy New Year folks. I finally installed my M3 wishbones on my '07 328i. They were a tight fit but I figured them out. Was able adjust back the toe afterward, now the car rides great.
I have a question about the headlight adjustment arm, when retrofitting to a non-M.
How does the adjustment arm connect to the wishbone?
I threaded one end of the adjustment arm through the small hole protruding from the wishbone, and temporarily fastened it with a small nut. Not sure this is correct since my car's standard headlight adjustment arm connects to a bracket that clips to the wishbone.
Any comments, pics or other guidance is appreciated.