View Single Post
      01-01-2013, 03:33 PM   #14
Major General
E90Company's Avatar

Drives: Car
Join Date: Mar 2012
Location: FL

iTrader: (2)

Originally Posted by SCSRe92 View Post
Which brings me to my next question. How exactly do you log? sorry jb4 noob
N54Tech has a guide on exactly how to do it so check that out. Basically connect the USB cable to your laptop, download the JB4 interface software from that website, check which COM port your USB cable is running on through Device Manager on your PC and enter that into the JB4 program. After that turn on your car's ignition (Key in slot, start button pressed without pressing the brake to start it) and press connect in the JB4 program. Then just hit start log when you are ready, and floor the car in third gear from 2k to redline. Ideally a full third to forth gear log is best but a full third gear will be good enough. If you need any help setting it up or reading them you can PM me