View Single Post
      01-03-2013, 12:18 AM   #35
Bama335's Avatar

Drives: '13 E82 135is '13 E88 135
Join Date: Mar 2007
Location: Dixie

iTrader: (0)

Originally Posted by ucmike View Post
I've been looking at them, but have read the shift boot may not line up properly. Will I have to buy a new one with the zhp knob?
It'll line up with the stock boot, all you need is the knob itself. The part number is 25 11 7 896 886, should run you about $70 from Tischer or equal

Install is a breeze, you just put it in 2nd gear and pull the stock knob straight up/off.

The ZHP knob then fits right on - it's both shorter and weighted, a much better feel. I used it on an E90 335 for 3 years, barely even looked worn afterwards.

You can search the forums here for some additional discussions/pics.

Enjoy that new ride!
2013 E88 135i B39/LWD1 DCT
2013 E82 135is 416/LWNL 6MT