View Single Post
      01-03-2013, 11:26 AM   #1
onebadmofo
Banned
 
Drives: 2007 E92 335i
Join Date: Aug 2010
Location: Central NJ

Posts: 2,394
iTrader: (14)

The 470whp partout.

I made myself a promise that if I won't sell the car by 2013 then I'll start parting out. So here I am parting out
Due to the amount of mods I have on the car and lack of time and tools the mods will be sold in "batches" and this first post will be constantly updated.

Local and cash only. I can accept credit / debit cards anywhere but you'll have to offset the fees that I get charged when using Square (2.75%).

Parts as of 1/6/2013


---------------------

M3 cabin filters. A little scratched up but work well.

$80 picked up.


---------------------

BMW OEM Style 313 18" wheels with. 3 out of 4 wheels are curbed, some bad (got them like that). Tires are Continental DWS with plenty of thread left. I have a spare rear tire as well as a spare donut with BMW jack kit (never used).






^rear tire

$600 + any stock 18" BMW wheels (style 189 or 162 preferred) with stock runflats without bubbles that will fit E92

---------------------


Vishnu charge pipe WITH black Forge diverter valves + your stock CP + DV's - $500
Please note that the CP comes with meth bungs and I don't have the plugs for them if you don't use meth.

Sounds of DV's



---------------------------


Vishnu Procede V5 with 2step and NLS. Locked (extra $100 I believe), $300


---------------------------


Vishnu meth kit with trunk mounted 2.5gal tank. I will need the amp cover in return from your car because this is what the tank is mounted on - $600




Buy all Vishnu stuff for $1200 (as opposed to $1400) and I'll install it as well..

---------------------------


Mtec License plate lights. Brightest damn lights you can buy. These lights will fit both LCI and pre-LCI. $60 + your stock pre-LCI lights.


Rixter V2 boost gauge - $300




---------------------------


850-watt radiator fan from an 1M / 335IS - $350, no core needed.


---------------------------


TiAG OEM rear M-sport bumper with diffuser wrapped in CF - $500 + your stock TiAG bumper in good condition.



---------------------------


FRM3 module - $300



---------------------------


"Big" parts. I don't have a garage or tools to swap them around so you have to do that yourself.
ALL OF THESE PARTS HAVE TO BE SWAPPED AROUND WITH YOUR STOCK PARTS. I DON'T HAVE A GARAGE, TOOLS OR TIME TO DO THIS, SO YOU HAVE TO ARRANGE THAT YOURSELF. THE PRICES REFLECT THAT.


ClutchMasters FX400 clutch - $100 + your stock non-slipping at stock power levers clutch installed


Car has a COMPLETE M3 suspension installed. If you find a shop to do the swap you can have it all for $500. Here's what's included, I have bushings as well ($2300 value)
OEM BMW E90/92/93 M3 Front Strut Tower Brace Kit
OEM BMW E90/92/93 M3 Front Control Arm/Tension Strut Retrofit Set
OEM BMW E9x M3 Aluminum Rear Guide Rod Set
OEM BMW E9x M3 Aluminum Rear Wishbone Set
OEM BMW E9x M3 Front Sway Bar Kit
OEM BMW E9X M3 Rear Sway Bar Kit

http://www.trademotion.com/partlocat...catalogid=4462

Parts that are SOLD or were sent a deposit for, please don't ask me about them

Turbos, LSD, Axles, CIC, LCI tail lights, Lux reverse lights, Steering wheel, trim, front 12mm spacers.

Last edited by onebadmofo; 01-22-2013 at 10:21 PM.
onebadmofo is offline   Russian Federation
0
Reply With Quote