View Single Post
      01-07-2013, 10:02 AM   #1
First Lieutenant

Drives: 2006 E90
Join Date: Dec 2012
Location: New Jersey

iTrader: (0)

Help installing PAC SWI-CAN2 and SWI-RC

Hey like the title says I'm trying to install these on an 06 E90. I thought I had the wiring right but when I test fitted in the car with the aftermarket radio I couldnt get the led on the RC to light up.

I have toe CAN2 connected to the RC via the molex plug and the rc plugged to the Alpine with the 3mm plug. I wired the CAN2... the yellow to Constant the black to ground and the CAN + to what was labelled as CAN high on the oem harness and the CAN - to what was labelled as CAN low on the oem harness.

The radio powers up but not getting anything out of the PAC units, although I didnt have time to check with a multimeter.

If anyone has installed this let me know if I have the wiring right!