View Single Post
      01-08-2013, 10:00 AM   #8
NTXE92
Enlisted Member
0
Rep
36
Posts

 
Drives: 2009 335i
Join Date: Jan 2013
Location: Plano

iTrader: (0)

If you are using the same tires and wheels you did in the past and did not have issues...

An alignment is not going to solve your problem. There is no adjustment that allows you to adjust your camber independent of the strut because the strut itself is bolted to the knuckle, which is bolted to the wheel. Your problem is either a bent strut, bent knuckle or both. Since hitting something hard enough to bend the knuckle is usually a fairly memorable event, I would start with the strut. Check and see if you can visually see a bend in the strut.