View Single Post
      01-18-2013, 10:41 AM   #14
Can't decide....
135Pats's Avatar
Drives: 135i
Join Date: May 2012
Location: Maryland

Posts: 5,419
iTrader: (1)

Originally Posted by cn555ic View Post
Well thats another issue to why prolonged pulls at 19 psi is not a good thing if your looking for not having to replace the stockers especially when you dont have the supporting mods to run that high...
Valid points, esp. without a FMIC or any sort of exhaust modifications, those turbos are going to get red hot. But the actual log numbers look more or less OK to me. For comparison to OP i'm FBO minus downpipes and my car targets and hits roughly 17psi midrange that tapers down to the high 11s up top. It seems perfectly safe to me, but I wouldn't push it harder than that without going fully catless.
E88 FBO N54 Alpinweiss/Coral Red/RB Turbos/Meisterschaft Race/Berk Resonated/Macht Schnell 3"/ER CP/Synapse/VRSF FMIC/FFTEC LPFP/HFS-4 DO Stainless Lines/BMS DCI/BMS Thermostat Delete/Rob Beck PCV Valve + Cap/BMS OCC/PTF E50/ST Coilovers/M3 FCA + Tension Rods/M3 Subframe Bushings/M3 FSB/DINAN Camber Plates/Apex ARC-8/Project Kics/VAC Hubs/Rogue Transmission Mounts/Alpina TCU Flash/Icarbon/Kerscher/BMW Performance
135Pats is offline   United_States
Reply With Quote