View Single Post
      01-24-2013, 10:18 AM   #121
2008 335i E92, Almost full mods

Drives: 2008 335i E92, Procede V5
Join Date: Mar 2009
Location: Ontario, Canada

iTrader: (0)

Garage List
2008 335i Coupe  [3.00]
Originally Posted by sle39lvr View Post
I had the car on highway the first time after getting M3 control arms. I get a vibration on the steering right at 85mph. Far as I know my wheels were balanced properly about 1000 miles ago when I get new tires. Only thing I can think of is the tie rods being worn out...
The M3 arms won't cause that. You WILL identify any other flaws, and have more road feel for sure. Others including me noticed that.

I would go and get the wheels balanced again, and ask to watch the guy when he does it and look at the tire spin... make sure it is perfectly balanced.

Get a 4 wheel alignment, get printouts before and after (you probably did this) - and get them to check all the arms. I had to replace my front toe arms because they seized and couldn't do the alignment.

My 2 cents.
2008 335i E92 Black, Procede Rev 2.5 (11-1 map), BMS DCI, AR Catless DPs, AMS FMIC, Procede PWM Meth, Forge DVs, CDV delete, 230s w/ 235/265 Michelin PSS, Dinan S3 susp w/ front/rear M3 arms (4), Wavetrac LSD, Subframe bushings, Dinan Rear Sway, Rogue toe arms, Stoptech Slotted rotors, Stoptech Street pads w/ steel lines